Dec

09

How to Clean Outside Windows From Inside

Cleaning the windows can prove to be a tough task because cleaning the outside part of windows from inside the house can be very cumbersome. The stains can accumulate quickly on windows from dust, grime, and smudge, making the windows lose their clarity and look. Fortunately, there are a few methods and products that can be utilized to wash outside windows from within the house.

In this all-inclusive information, you will discover the steps, materials, and procedures you should follow in washing windows from the inside. If you do this, you will be sure to get a clear understanding of what is in front of you in the shortest time possible!

Tools and materials you’ll need:

Regardless of the window cleaning solution used, it has to be a high-quality cleaning fluid, whether it’s Windex or a mix of vinegar and water used to dissolve all dirt and stains off the window. Do not use severe abrasive cleaners as they end up scratching the window glass.

Soft and lint, due to this, they make good window cleaning cloths because they retain dust on the surface of the glass and are not likely to cause any scratch combinations.

A window squeegee is important when washing windows from inside the house. It is to rinse and pull out all of the remaining water and cleaning solutions so that there is no streak left on your windows.

Drying Towel / Lint Free Towels / Rags – For after you clean your windows with the squeegee.

You’ll need to utilize a ladder or extension pole if necessary.

If you make a cleaning solution for your squeegee, you will want to bucket this and that.

Step 1: Preparing your windows

First of all, you need to eliminate anything that may be attached to the window, such as blinds, curtains or shades, in order to have full access to clean the entire window so that the water does not get to them. You will also want to wash these items while you are at it to have a whole cleaning session done.

Third, make sure that dust or any other debris does not cling to the sills or the window frames. Use a dry microfiber cloth to remove dust from your window frame and sills. This will assist in that process so that the dust is not swept up when the glass is cleaned.

Step 2: Cleaning solution

Your cleaning solution can be prepared by diluting one-part white vinegar with ten parts warm water into a spray bottle. Another option is to buy a specific window cleaner in the store or supermarket. In as liberal quantities as possible, the cleaning solution was poured over the window glass so that it would form an even coat over the window glass.

Step 3: Using the squeegee

Start from the top and then press hard on the squeegees and move in a backward “S” “-like pattern. This goes a long way in preventing the chances of making streaks. Always clean the blade with a lint-free cloth or any plain towel right after every stroke.

Step 4: Detailing

You have to wash along the edges and corners of the window as you continue with the squeegee. These areas usually acquire more dirt and grime, and the cleaning tools have a difficult time reaching them. Clean these surfaces with a microfiber cloth that will not transfer bacteria to the surfaces.

Step 5: Dry the window

Finally, once you have wiped the entire window, using the squeegee, wipe it with a dry, clean and lint-free cloth or towel to eliminate all the water and cleaning solution. Take care and ensure that the window is very dry to prevent water spots and ugly streaks on the cleaned area.

Step 6: Inspect your work

Take a step back and survey your window to look for any places that have not been cleaned or for any streaks that have remained. If you need to do so, start washing the window again to make sure it doesn’t have smears or streak dirt on it.

Step 7: Cleaning the window frames

When you have finished washing the glass, wash the frames and sills with a damp cloth and your washing solution. Nevertheless, it is advisable to dry them later to avoid water damage or even chances of managing.

Step 8: Replacing window treatments

Last but not least, also change your window treatment, which should be installed and hung even and smoothly.

Tips for Maintaining Clean Windows:

Do not leave dirty residues and blurs on your windows – wash them periodically.

Window guards or screens are likely to protect your windows from getting messy with dirt and the rest.

This is to prevent blinds and curtains from rubbing dirt and grime onto windows.

You can avoid the extreme conditions affecting your window through the administration of weatherstripping or window film.

To the listed steps and tips, you can clean outside windows from inside your home as recommended within no span of time. It is successful. The process is systematic and that every step is taken with precision to achieve a window free of streaks – or at least as clear as the purest crystal. Happy cleaning!