Jun

18

How to Remove Hard Water Stains From Toilet Bowl Rim

The stains usually form along the inner peripheral region of a toilet bowl through the regular use of hard water. These stains result from the concentration of minerals within the water and subsequently the evaporation of the water, leaving behind a solid stain that adheres to the surface of the porcelain. These stains are ugly and can act as a perfect spot for dust, bacteria, and germs to settle on. Learning how to clean these hard-to-remove stains might seem like a difficult task. Still, it is pretty simple if done with the appropriate cleaning supplies and some effort.

Assessing the Stains

When you plan to clean, ensure that you start by viewing the stains on the surfaces so that you can gauge just how tough it will be to clean the surface. Freely adherent deposits on the surface will be easier to clean than those that have accumulated for years and formed a hardened layer. Also, look at the position and distribution of stains in the anatomy of the resultant image. He/she may try to clean it with some hard-to-reach areas like the inner rim and small crevices, which may take some extra effort to clean. It helps to decide what sort of cleaning procedure and materials would be most appropriate for every kind of item.

Collect All the Right Cleaning Materials

Gentle cleaning of accumulated toilet rim stains involves the application of cleaning agents which dissolve minerals and penetrate soap scum. Valuable products to have on hand include:

– White vinegar – Some of the minerals are hard to dissolve and with the help of the acetic acid, this problem can be solved. It would be better if you allow it to stand for a while before scrubbing so that it can do its magic.

– Baking soda – It is used as a gentle abrasive to remove grease or any other stains, provided it is in the form of paste. Especially effective is combining baking soda and vinegar, as these two mixed are involved in a chemical reaction that fizzes.

– Toilet bowl cleaner – Look for a cleaner that contains an acid, such as hydrochloric acid, which can dissolve minerals. Ensure it says that it has the ability to eradicate rust, lime, hard water stains, etc.

– Other supplies – Instead of using your hands to clean rags or sponges, you should wear gloves on your hands and also use goggles to protect your eyes.

Cleaning Techniques According to Stain Intensity

There are two main categories in cleaning method; the first one is the ease of stain removal on the surface. Here are some step-by-step guidelines for categorizing the stains as light stains, medium stains, and heavy stains.

Light Stains

For just a light stain line or minor mineral deposits:

1. Pour some squirt toilet bowl cleaner into the stains. Allow it to stand for as long as possible, preferably not less than 5 minutes.

2. Clean with a toilet brush or sponge of a dry cloth.

3. Flush the toilet. Finally, you must wash the brush in fresh water.

4. Use this method as often as necessary until no signs of the stain are left.

Medium Stains

For a visible stain line or some heavier staining:

1. Baking soda paste can be made by using baking soda and water. The first step is to use a thick layer, rub it on the affected area with a very fresh paint brush.

2. Using undiluted white vinegar, spray or pour it as a way to clean the surface of the cookware. Let it stand and let the carbonation develop for 5-10 minutes.

3. Wash with a brush or scrubbing pad.

4. Flush and rinse well. Repeat if needed.

Heavy Stains

For thick and heavy mineral deposits:

1. Slather the entire inner rim with the gel form of the toilet bowl cleaner. It is also advisable to let the food sit for as long as possible, preferably the whole night.

2. In the morning, brush with a soft brush. When there are tight spaces, such as between the teeth, use a toothbrush to clean them.

3. With water, wash the brush used in applying the dye.

4. Creating a baking soda paste entails mixing baking soda in a bowl with water, but it should not be too runny. Rub the second layer on the remaining problem areas in the same manner as before.

5. Pour on undiluted vinegar. Allow it to fully react and for the bubbles to form for approximately 15-30 minutes.

6. Scrub vigorously with brush. Use a little more sweat and passion!

7. Flush and rinse thoroughly. It’s advisable to repeat the same process if one is not pleased with the results achieved in the process.

Methods of avoiding future hard water stains Most of the techniques used in preventing future formation of hard water stains involves the modification of water supply or plumbing system to reduce the concentration of calcium carbonate insoluble sediment in the water.

To minimize repeat scrubbing sessions, implement these prevention tips:

– A necessary instruction highlighted here is that you should wipe the rim dry after flushing the toilet. Do not stay near water droplets and allow them to evaporate.

– Use cleaning products designed to eliminate mineral deposits to clean the toilet surface on a regular basis.

– He should also ensure that he takes short showers or invests in a water softener to decrease the quantity of minerals.

– Water softening should be avoided when flushing the drains to improve the flow rate of the water. The contents of the pigments can also minimize the effect of the water in slowly corroding the porcelain surface.

– Ensure that toilet tank is well fixed by making necessary repair in a bid to eliminate chances of leaking or sweating on the rim.

You can prevent the formation of hard water stains over and over if you remain careful especially with wiping, cleaning, and the type of water used on the toilet system. However, when they show up again, you better have the right cleaning tools and method to get back to a fresh look. Well, with a little bit of regular effort, the stubborn toilet rim does not have to be a nightmare to clean anymore!